Automatic battery chargers
CH-105, CH-105-24
13
2
INTENDED
USE
OF
THE
PRODUCT
2.1
O
PERATIONAL CONSTRAINTS
Select an installation place in compliance with operational constraints (operating
temperature and protection degree).
It is prohibited
to stretch cables connected to Product!
Caution!
Distance between the installation site and magnetic compass shall
not be less than 1 m!
2.2
U
SAGE PREPARATIONS
2.2.1
Safety features
While preparing the Product for operation, check it visually after unpacking;
mechanical damage shall be absent.
Connection to power mains shall be provided only in compliance with input
power requirements.
Before connecting the Product shall be switched off and have a proper grounding.
While using the Product the staff shall follow “The technical rules for operation
of electric installation” and “Safety rules for operation of electric installation” while
testing electrical circuits and insulation resistance.
2.2.2
Visual check procedure
Before switching the Product on:
– observe visually integrity and initial position of the controls on the front pan-
els;
– check the absence of dust and dirt on the Product casing; clean with a soft
cloth if necessary;
– check that cable connectors are securely connected to the Product, and it has a
reliable grounding.
2.2.3
Switching on instructions
While connecting the Product and preparing it for operation follow the steps be-
low:
‒
transfer circuit breakers of main power switchboard to «ON» position»;
Summary of Contents for CH-105
Page 2: ......
