5.3.2 Chinstrap
Disassembling
(1)
Push and release the rear clip and pull the rear straps through the headband (between ratchet pad and rear
headband).
(2)
Push and release the side clips and pull the chinstrap out .
Reassembling
(1)
Attach the side clips (push down until it click is heard) ensuring buckle is on the left (wearer’s perspective).
(2)
Slide the rear straps through the headband and attach the rear clip (push down until a click is heard) .
5.3.3 Suspension and Headband Assembly
Disassembling
(1)
Unlock the adjustment levers (yellow) on the sides and on the rear.
(2)
Release the side attachment points by pressing the lever and pulling out the suspension.
(3)
Release the rear attachment point by pressing the lever and pulling out the suspension .
Reassembling
(1)
Insert the rear attachment point and push until it clicks.
(2)
Pre-insert the side attachments points (left and right) and push both sides simultaneously until it clicks.
(3)
Ensure that the ride height adjustment is correct (→
).
5.3.4 Front Plate
Disassembling
(1)
Push both attachment clips towards the inside of the helmet until the front plate is released.
Reassembling
(1)
Position the front plate and slide it downward towards the edge of the helmet until it clicks.
5.3.5 Rear Cover
Disassembling
(1)
Push both attachment clips and pull the cover out of its location.
Reassembling
(1)
Position the cover and push it inside it location until it clicks.
For an overview of the available replacement parts, see section
.
18
US
5 Care and Maintenance