Remote Alarm units
AU-106, AU-206
7
«U» input is used to connect alarm based on voltage level formation.
JP2 and JP3 jumpers control operation modes of the Product, see Figure 3.
Jumper JP2 selects dry contacts alarm type, see Figure 4
,а)
or voltage, see
Figure 4
,б)
, jumper JP3 – failure signal type.
Figure 3 – Layout of connectors to set up operation modes of AU -106
Table 3 – Setting up operation modes of AU-106
№ pin
JP2
№ pin
JP3
Description
1 and 2
1 and 2
Dry contacts closing
1 and 2
2 and 3
Dry contacts opening
2 and 3
1 and 2
Voltage 5 V on input «U»
2 and 3
2 and 3
Voltage 0 V on input «U»
Summary of Contents for AU-106
Page 2: ......
