2
Notices
WARNING!
Repair or alteration of the device beyond the procedures described in the user guide or by anyone other than a person
authorized by MSA, could cause the unit to fail to perform properly. Use only genuine MSA replacement parts when
performing any maintenance procedures described in the user guide. Substitution of components can seriously impair
performance of the unit, alter intrinsic safety characteristics or void agency approvals.
Failure to follow this warning can result in serious personal injury or death.
Approvals
subject
to
change
without
notice
and
may
differ
based
on
configuration,
part
number
and/or
country.
Contact
Customer
Service
for
specific
approval
information.
2.
1
Radio
Information
NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Canada: CAN ICES-003(A) / NMB-003(A)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
English:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
French:
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Radio
Power
Frequency Range
RFID
≤ 18 dBm
13.56 MHz
4
ALTAIR io DOCK
US
2 Notices
