DONNING
When Using the Advantage 4000, ensure the inhalation
valve disc is laying flat against the adapter orifice.
Failure to follow this warning can result in serious per-
sonal injury or death.
DONNING THE FACEPIECE WITH THE CLOTH HEAD
HARNESS
1. Loosen the harness straps until the end tabs are at
the buckle.
2. Grasp the harness straps.
3. Insert chin into the chin
cup.
4. Pull the harness over
the head so that the
netting lies flat and is
centered behind your
head.
5. Hold the facepiece by
the inlet housing while
tighten the lower
straps. Pull them
straight back, not out.
6. Tighten the upper
straps.
7. Adjust the straps as
necessary until the
facepiece fits snugly
against the face.
8. Ensure that straps are
adjusted to same
lengths from left to
right sides of the face-
piece.
9. Perform a negative
pressure seal test.
13
TAL 018 (L) Rev. 6 - 10073772
Summary of Contents for Advantage 4000 Series
