CAUTION!
The screws are not reusable and MUST be replaced with new ones after each disassembly.
Failure to follow this caution can result in minor or moderate injury.
Assembling SingleLine SCOUT
For assembling the device, a Torx spanner and a small screw driver are required.
(1)
Unscrew the battery cover of the device with a Torx T10
spanner.
(2)
Remove the battery cover.
(3)
Remove the U-clip with a small screw driver.
(4)
Push the SingleLine into the attachment point.
(5)
Secure the SingleLine with the U-clip.
(6)
Insert the batteries. Follow insert direction printed in
battery compartment. Only use certified batteries (see
chapter
).
(7)
Close the battery compartment with a Torx T10 spanner
(0.7 Nm).
(8)
Perform a tightness check (see chapter
).
8
3 Installation
GB
