REMOVING THE RESPIRATOR
DECONTAMINATION
DO NOT remove respirator until respirator and protec-
tive clothing are decontaminated; otherwise, exposure
to contaminants may result. Follow decontamination
and disposal procedures established by appropriate
authorities. Failure to follow this warning may result in
serious personal injury or death.
Once the protective equipment has been decontaminated,
proper disposal of affected equipment must be per-
formed. Disposal is to be performed as required by feder-
al, state, and/or local laws.
PROCEDURE FOR REMOVING THE RESPIRATOR
1. Remove strap from around the neck and support the
canister.
2. To remove the facepiece, insert your thumbs under
each of the harness head straps end tab and fully
extend the harness head straps.
3. Grasp the facepiece by the component housing or
bottom head harness straps (not the exhalation valve
or canister).
4. Pull it up and away from your face.
Note:
Before the next use, check the respirator facepiece
and if necessary, clean and disinfect. Always use a new
canister. Do not reuse the canister.
19
TAL 803 (L) Rev. 0 - 10086002
Summary of Contents for 10086004
