background image

MSA

Safety Regulations

SSR 90 [K60]

4

GB

1

Safety Regulations

1.1

Correct Use

The SSR 90 [K60] self-rescuer is a respiratory protection device [chemical oxygen 
apparatus] for self-rescuing which is independent of the ambient atmosphere. It 
protects the wearer of the devices during escape from a dangerous ambient atmos-
phere or whilst waiting for rescue from poisonous gases, toxic particles and oxygen 
depletion. It is to be used exclusively for selfrescue under dangerous conditions and 
is not intended for long-term use. 
The device described in this operating manual comply with the European Directive 
89/686/EEC [PPE Directive].
The device is developed for one mission, used devices must always be replaced, 
reuse is not permitted. 

It is imperative that this operating manual be read and observed when using the 
product. In particular, the safety instructions, as well as the information for the use 
and operation of the product, must be carefully read and observed. Furthermore, 
the national regulations applicable in the user's country must be taken into account 
for a safe use.

Alternative use, or use outside this specification will be considered as non-compli-
ance. This also applies especially to unauthorised alterations to the product and to 
commissioning work that has not been carried out by MSA or authorised persons.

Warning!

The device may only be used once and must never be reused. Used or 
opened devices must be replaced by new devices.

Danger!

This product is supporting life and health. Inappropriate use, mainte-
nance or servicing may affect the function of the device and thereby se-
riously compromise the user's life.
Before use the product operability must be verified. The product must 
not be used if the function test is unsuccessful, it is damaged, a compe-
tent servicing/maintenance has not been made, genuine MSA spare 
parts have not been used.

Summary of Contents for SSR 90
















Reviews: