ENG
LIGHTING MODE
When an central LED of the taillight is blink until helmet is power on, press the
POWER
button for a second to switch the 3 lighting modes in order:
1. Adaptive warning light mode A (Running light)
2. Adaptive warning lighting mode B (2x Short blink light/sec)
3. Adaptive warning lighting mode C (1x Short blink light/sec)
Brake light
In all three operating modes, when the driver brakes (tilts the helmet towards to the front),
the brake warning light turns on automatically. The light turns off again and returns back
into Lighting mode after 2 seconds.
Helmet enter adaptive warning light mode automatically with only a central LED blinks all
the time
during daytime
or in a bright environment
.
Helmet
turns On Led light mode A, B or C automatically
at
night or in a dark environment
.
CHARGING
To Charge your helmet, please use your standard Smartphone USB adapter, 5V DC/ < 2A.
1.
Open the soft rubber lid.
2.
Insert a USB cable into the USB Charging cable interface of the helmet.
3.
Charging starts when the central LED blinks.
4.
During charging, when the central LED stops blinking and turns Off, charging is
completed.
5.
Disconnect USB cable and Charger from outlet.
Warning: During the Charing process, do not leave the Helmet and Charger unattended!
GENERAL SAFETY PRECAUTIONS AND ADVICES
The helmet contains electronic parts inside. Please do not take a long ride in the rain
although the helmet can prevent the rain from splashing.
After the helmet gets wet in the rain, the water droplets might occur in the chimney of tail
LED lights. The water droplets will disappear when you put the helmet under the
ventilation environment for 1-2 days.
Do not clean with solvents, bleaches and strong detergents. They can damage helmet,
sometimes invisibly. Use mild soap and water only.
The helmet contains the chargeable Lithium-Polymer battery. The battery capacity varies
with temperature change. The
battery life can decay when the helmet is used at low
temperatures or below Zero degrees Celsius.
Trying to clean the golden colour contacts of the charging plug sheet with metal or hard
tools such as blades or tweezers is strictly forbidden. Please use cotton swabs with clean
water or alcohol in case of cleaning. Please make sure the charging plug is clean and try
while charging the helmet.
