Fiber Driver
EM316E3 & EM316E3SF
P/N: 1226006-001, REV_L PAGE 13
UNIT INSTALLATION
STEP 1
Remove required amount of blank panels from the NC316BU-xx.
NOTE
: Per FCC regulations, either a panel or a module should
always
cover chassis slots.
FIGURE 1.1 Take out the required amount of blank panels.
STEP 2
Align the edges of the EM316 module to the rail inside the chassis,
see pictures below.
FIGURE 1.2 Align the edges of the EM316 to the rail inside the chassis and then insert the unit.
