User Manual
VARIO
luxx
SYNGAS
32 / 50
MRU GmbH, D-74172 Neckarsulm
Setting of lower limit (4 mA):
This setting determines the lower end value, corresponding to 4 mA.
If the measured value falls below the set value, the analog output stops at
4 mA.
Setting of upper limit (20 mA):
This setting determines the upper end value, corresponding to 20 mA.
If the measured value rises above the set value, the value stops at 20 mA.
Setting analog outputs during zeroing
The following settings are possible
•
Hold - The outputs kept the last values from before zeroing
•
2 mA - The outputs change to 2 mA to indicate the zero point
