MRU Instruments, Inc.
USER MANUAL OPTIMA 7 BIOGAS
46
14.3
Service values
Should your analyzer display an error message after zeroing (for example: „O2-Sensor not OK"), then you can use the
Service value menu to get detailed information about possible defects. In this menu you will see all service values of the
sensors and also other parameters.
In case of a defect contact the MRU service department. The MRU service technician will ask you about these values or
he will ask you to send them by fax or email.
OK
,
Jump between the lines
F1
Function test gas pump (on / off)
F2
Function test purge pump (on / off)
ESC
return
