mru NOVAplus biogas User Manual Download Page 21

Page: 21 / 78

USER MANUAL NOVAplus BIOGAS

MRU GmbH, D-74172 Neckarsulm

21 / 78

4.2.

Keypad

Description and function of the keys:

ON / OFF

By pressing the ON/OFF button the RCU will
start up without delay.

By pressing the ON/OFF button the base
unit and the RCU (if RCU is placed in the
charging doc) will start up.

The powering down of the unit is timely de-

layed to protect the sensors if there is no

fresh air inside the system. If there is no

fresh air inside the system the analyzer will

recommend a purging of the sensors.

Function

Keys

Activates the functions seen on the display

(2 function key bar.

Menu Key

Will show all available functions in the win-

dow that is currently in use – also those

which have an individual key on the key

pad like the printer and the three function

keys.

ESC

Abort or return to the menu above

Arrow Keys

Jump in between lines, change values

Confirmation key, select a marked menu

point

Printer Key

Activates the print out of the measuring re-

sults in the measuring screen in a pre-de-

fined format. Linefeed when there is no

printable display condition:

Summary of Contents for NOVAplus biogas















































































Search results

Summary of Contents for NOVAplus biogas

Reviews:

Related manuals for NOVAplus biogas

Brands by name

Popular brands

mru NOVAplus biogas, User Manual

Search results

Summary of Contents for NOVAplus biogas

Reviews:

Related manuals for NOVAplus biogas

Brands by name

Popular brands