mru AirFair OPTIMA 7 NDIR, User Manual

Page: 32 / 58

MRU GmbH USER MANUAL OPTIMA 7 - NDIR
32
12.4 Storage the measuring results
If in the function key bar "store" is indicated, you can store with the accompanying function key F2
or F3 the measurement in the data memory. The function of the data memory is explained in chap-
ter 13.
12.5 Printing the measurement results
While in the measurement window pressing the printer key will send the information to the IR print-
er.
The speed printer (IR desktop printer) Art. No. 62693 must be aligned in addition as follows:
All values that can be seen in the measurement window on all three pages will be printed, double
measurement values will only be printed once.
Further technical specifications as well as battery and paper rolls changes please see separate
printer manual.
12.6 End of measurement
A current emission measurement can be stopped at any time with the F1 key. The display will
change its colour and the measurement will be frozen. At the time you stop the measurement all
measured values are still available and can be viewed at a later time (see chap. 12.7).
Return to the measurement menu by pressing the ESC key.