User manual
500GD
10 / 52
MRU GmbH, D-74172 Neckarsulm
3
Description
3.1.
Purpose
The main purpose of the analyser in combination with various inter-
changeable sensors is the detection of gases and exhaust gases in gas
and heating installations.
For example, checking of:
•
freely laid gas pipelines
•
ambient air for combustible gases
•
manholes and cavities
•
Installations for external tightness
•
newly laid gas pipelines for leaks.
In addition, the range of application of the analyser can be extended by
further interchangeable sensors.
The following interchangeable sensors are available:
•
Gas sensor H40x for detecting leaks in gas pipes.
•
Humidity sensor RM400 for detecting leaks in flue pipes.
•
Condensing humidity sensor RM400 for spillage tests on flue gas
•
Systems
•
Infrared temperature sensor IR400 for contactless measurement of
surface temperature
•
Hygrometer sensor HM400 for the check of indoor climate.
•
Refrigerant detector RF400 for leak detection on refrigeration
Systems
•
Gas sensor CO400 for monitoring the CO-concentration in the
ambient air.
Visit our webpage
to see available options or talk to your
MRU representative.
