MCharger_Easy_S_ENG
Copyright © 2022
Page 23
O
Operating instructions
General
Before using the wallbox, the suitability of the vehicle for charging with it must be checked.
INFORMATION!
Plug the cable into the appropriate vehicle connector only. Do not
use force!
INFORMATION!
During the charging process and in standby mode the charging cable
must be laid in such a way that it is not a trip hazard and cannot be run over by other
vehicles.
Note:
When not in use, the cover of the charging cable must cover the contacts of the
vehicle plug. After the charging process has been completed, the cover must be correctly
placed back onto the plug. For the rest position, the cable must be wound up so that the plug
does not lie on the floor. Optionally, a wall holder for the plug (part No 503146) can be
ordered.
Standby mode
After the wallbox is properly assembled and installed according to the instructions, it will start into
standby mode.
In this mode, the MRS logo is shown on the display and the wallbox is ready for charging.
Vehicle connected
As soon as a vehicle is connected to the charging station, the display changes and shows a vehicle
connected to a wallbox. Now the charging process can be started, if this has not already happened
automatically.
If the charging process is automatically started by the vehicle, this display is only visible for a short
time before it switches to the next display mode.