Pan Bars Quick Start Guide
14
Subsequent sessions
Once you have configured Flair to work with the Pan Bars, the start-up
procedure for subsequent sessions is as follows:
1.
Make sure all cables are attached except the power cable on the Pan
Bars.
2.
Power up the Windows PC but do not start Flair yet.
3.
Power up the Pan Bars in Flair mode.
4.
Start Flair.
5.
Enable the mimic controls in Flair, either by right-clicking on the
relevant axes buttons at the top of the Flair window and choosing
Mimic Setup
in the pop-up menu, or by using the main menu
option
Mimic
>
Axis Mimic
.
Hint
Flair does not store the
Mimic
>
Axis Mimic
settings from one
session to the next, so you need to do this step at the start of
every session. This is for safety reasons, as it would be
dangerous to start up a robotic system with the mimic devices
in an unknown state and fully enabled.