MRMC Pan Bars, Quick Start Manual, Page: 14 / 24

Pan Bars Quick Start Guide
12
9. In the Network Setup pop-up, click on the buttons Save , Apply , and
Exit .
10. Restart Flair.
Flair should now automatically recognise the Pan Bars and load the
.btl
file into them.
11. Check that Flair is receiving data from the encoders in the Pan Bars
by using Flair menu option Setups > Test Mimic Inputs and
making sure that the relevant mimic axes numbers change when you
move the Pan Bars:
Hint
The IP address of the Pan Bars in Normal mode (and possibly
printed on a sticker on the Pan Bars) is different from its IP
address in Flair mode, hence the need to use the Find facility to
find out the IP address of the Pan Bars when used with Flair.