Round Rail Quick Start Guide
2
The track is
not reversible
due to the cable chain and rack,
which has teeth on one side. You must lay all sections the same
way around. If your track does not have the rack installed yet,
look at the rack clips on the track, which will grip the rail on
the teeth side when you install the rail later.
Keep in mind where the
umbilical cable
comes out on the rig.
Each track section has 12
feet
for supporting and levelling the
track, and 2
anchor brackets
for holding the track down.
Umbilical side
Clip
Teeth
Smooth
Rack
View looking
“Forward” down the
track with the gear
teeth on the left:
