Round Rail Quick Start Guide
7
Laying subsequent track sections
1.
If any of your track sections already
have a rack installed, loosen the rack
clips so you can temporarily slide the
rack along the track and out of the
way when you are joining the track
sections.
2.
Lay the next track section in line
with the previously laid track section
and as close to it as possible, making
sure it is the right way around (see
the notes on page 2).
3.
Raise the middle feet and anchor sleeves of the new track section so
they do not touch the ground.
4.
Adjust the height of the new track section to match that of the
previous section by adjusting the two corner feet nearest to the joint
(one on each rail).
Clip
Rack
Section 1
Section 2
Joint
Joint
