Polymotion Player Quick Start Guide
2
MHC Server does not store any data incoming from the TRACAB system
and only ever has the last positions sent from the TRACAB system for
processing.
To use Polymotion Player system for auto tracking robots following are
the high-level steps:
1.
Ensure that the heads are mounted at the desired locations with
respect to the football pitch.
2.
Set up TDCGraphics. (Only for Configuration 2).
3.
Prepare the heads to be used in Polymotion Player.
4.
Install Polymotion Launcher on all participating PCs in the
Polymotion Player system.
5.
Specify TRACAB server connectivity options in MHC.
6.
Set up player tracking options in MHC.
7.
Begin tracking.
8.
Use the Spotter screen to manage robots during tracking.
Setting up TDCGraphics (only for Configuration 2)
If TDCGraphics is installed on the same
PC as MHC Server, when you launch
TDCGraphics, a dialog box is displayed
where you need to specify the IP address
of the TRACAB server on the different
PC. The Configure dialog always shows
127.0.0.1 if the TRACAB Server is on the
same computer otherwise enter the IP address of the TRACAB Server.