MREL STRATACAM, Operation Manual

Page: 20 / 30

S t r a t a C a m ™ M i n i O p e r a t i o n s M a n u a l - E d i t i o n 1 . 0
16
3.4.2 StrataCam™ Mini Connections - Power
Connect the Power Cable, whether from the StrataCam™ Mini Battery (sold
seperately) or from the provided Power Cable connected to a 12 Volt DC battery ,
to the outlet on the StrataCam™ Mini Cable Unit as shown in Figure 20 . Unsure
that there is sufficent power to power the StrataCam™ Mini Cable Unit.
Now press the On button shown in Figure 21 to turn on the StrataCam™ Mini
Cable Unit . The StrataCam™ Mini Cable Unit will start and the monitor should
show the image coming from the StrataCam™ Mini Camera.
Now turn on the StrataCam™ Mini Monitor as shown in Figure 22 to view what
the StrataCam™ Mini Camera sees.
3.4.3 StrataCam™ Mini Monitor Installation - Monitor
Hood (Optional)
When using the StrataCam™ Mini Borehole Camera in direct sunlight or bright
areas, use the Monitor Hood to shield the StrataCam™ Mini Monitor from light,
as shown in Figure 23 . The Monitor Hood is affixed to the StrataCam™ Mini
Monitor using velcro pads that are adhered to the back of the StrataCam™ Mini
Monitor by removing their plastic backings. These pads come already attached
to the velcro on the Monitor Hood .
NOTE: Use of the Monitor Hood will inhibit the function of the buttons
on the StrataCam™ Mini Monitor . To adjust Brightness , Contrast ,
Saturation , and Hue settings with the Monitor Hood installed, use
the StrataCam™ Mini Monitor Remote Control enclosed in the
Monitor packaging.
The StrataCam™ Mini Borehole Camera is now ready
to be used.
Figure 20
Figure 21
Figure 22
Figure 23