MREL STRATACAM, Operation Manual

Page: 18 / 30

S t r a t a C a m ™ M i n i O p e r a t i o n s M a n u a l - E d i t i o n 1 . 0
14
3.3 StrataCam™ Mini Monitor
3.3.1 StrataCam™ Mini - Monitor Mount
If not already mounted on to the StrataCam™ Mini Cable Unit, attached the
bottom mounting bracket as shown in Figure 14 to the handle tube on the
StrataCam™ Mini Cable Unit. Tighten the bolts of the bottom mounting bracket
until tight enough to allow the bracket to move only slightly, be sure to not
over tighten the bracket as this could cause damage to the
StrataCam™ Mini
Cable Unit .
Attach the mounting arm to the bottom bracket as shown in Figure 15 .
Attach the top mounting bracket with the monitor mount to the mounting arm
as shown in
Figure 16 . Tighten and loosen the knob as highlighted in Figure
16 to alter the position of the monitor.
Figure 14
Figure 15
Figure 16