EarthLogger EL4+ User Manual
Page 28
Version 1.07
EarthLogger EL4+ User Manual v1.07.docx
© MRD Rail Technologies Pty Ltd
05Sep2018
COMMERCIAL IN CONFIDENCE ©2016 MRD RAIL TECHNOLOGIES PTY LTD WWW.MRD.COM.AU +61 7 3821 5151
5.6.2
Relay Config
EarthLogger is fitted with two relays able to control external devices such as Audible Alarms. Rules control
when each Relay is activated.
Relay Config
Select the Relay to be configured.
Note: The current Relay Settings will be
saved immediately if any changes have
been made
Select Channel Select the Channels which may activate
the current Relay
Select
Warning or
PreWarning
Select which Alarm State will activate
the current Relay
Select Voltage
or Resistance
Select which measured parameters will
activate the current Relay
Submit
Click Submit to save settings for the
current Relay
5.6.3
Misc Config
5.6.3.1
IP settings
By default, EarthLogger obtains a network IP address
from the DHCP server, when power is connected.
To configure a Static IP address:
•
Obtain required settings from your network
administrator
•
Select Static IP from the drop down list
•
Enter required values in the IP Address,
Netmask, Gateway and DNS1 fields
•
DNS2 field is optional
5.6.3.2
Time
To automatically update time:
•
Specify a NtpServer to synchronise time
•
Timezone, Date and time fields will
autopopulate
To set time manually:
•
If necessary, clear the NtpServer field
•
Select the required Timezone from the drop down list
•
Enter todays date in DD/MM/YYYY format
•
Enter the time in 24 hour format (HH:MM)
5.6.3.3
Email Notifications
•
EarthLogger can generate automatic notifications for Alerts and Warnings.
•
Enter a valid destination email address. Note: EarthLogger does not test that the address is valid.
