EarthLogger EL4+ User Manual
Page 23
Version 1.07
EarthLogger EL4+ User Manual v1.07.docx
© MRD Rail Technologies Pty Ltd
05Sep2018
COMMERCIAL IN CONFIDENCE ©2016 MRD RAIL TECHNOLOGIES PTY LTD WWW.MRD.COM.AU +61 7 3821 5151
V
IEW
D
ATA
The View Data page enables the inspection of recorded data. There are three tabs: Graph, Data, Test
5.3.1
Graph
Voltage and Insulation Resistance are displayed on separate, aligned charts, and events are colour coded. A
typical graph is shown below.
View the status of the channel is displayed. In the event of an Alarm or Warning, the User can Reset or Test
the EarthLogger from a remote location.
Data is displayed on time-based graphs. User options are:
•
Select the range of data available to display
•
Specify the width of display window (Time, x-axis)
•
Specify Channel to be viewed
•
Zoom in to areas of interest
•
Reset Faults on a per-channel basis
•
Test the selected channel remotely
The underlying data of the current Channel can be examined:
•
Select the Data tab to view the current Channel data in table form
•
Select Test to view the tests conducted on the current Channel
