Page 7
How to Use
mrcool.com
How To Get Cold Water
LED UV Sterilizer
Power Saving Mode
1. Press the Cooling switch on (switch position will be from "O" to "-
”
), the machine will start cooling.
2. Press the cold water button on the control panel. A "Ding” sound will signal the cold water status is
released and will last for 3 seconds.
3. Press the "water Outlet/ Ambient Water button" within 3 seconds and you will get cold water (a blue light
will circle around the "water outlet" button ).
4. Press the “water Outlet/Ambient Water button” again to end the cold water output. The machine will
conduct a 30-second cold water output if not ended manually.
If there is no manual operation within 30 minutes, the machine will enter the Power Saving Mode. This mode
only reduces the brightness of the light, it does not affect any other machine functions.
Brand new machine:
After the first complete water production cycle, the LED UV will work for 150 minutes.
DO NOT
interrupt this
process.
During daily use:
If there is no water production, the LED UV will conduct a 30-second sterilizer every hour.The LED UV will
conduct a 50-minute sterilizer each time the machine completes water production.