background image

 Page 2

Safety Precautions

mrcool.com

Read Before Using

Incorrect usage may cause serious damage or injury.

The seriousness of potential damage or injuries is classified as

 either a 

WARNING 

or 

CAUTION

.

WARNING

CAUTION

WARNING

• This bracket is rated for a maximum weight of 176 lbs. (80 kg). 

DO NOT 

exceed this limit. 

If the rated

   weight limit is exceeded, serious property damage and/or personal injury may occur.

• This ductless mini-split condenser mounting bracket is intended for use only as specified. Improper usage

   may result in property damage and/or physical injury.

•  Read the installation instructions fully and carefully before beginning product installation. If you have

   questions about the installation, please contact your dealer or MRCOOL Support at 270-366-0457.

• The installation of this product requires basic mechanical skills and a full understanding of the installation 

   manual. If you feel you are not comfortable performing this type of work, please seek a qualified

   professional.

• Before mounting the condenser bracket to the supporting surface, ensure the surface will support the

   combined weight of the bracket, condenser, and the attached components.

• To safely lift and position the bracket or condenser, an assistant or mechanical lifting equipment may be

   needed.

•  When tightening mounting hardware (bolts, nuts, screws, etc.), 

DO NOT

 overtighten. Over tightening could

   cause long-term damage to the support bracket and weaken or reduce its weight capacity.

• The bracket Is not Intended for any use other than the support of a ductless mini-split condenser.

• Check the bracket every three months to ensure it remains securely fastened and safe to use.

This symbol indicates that ignoring instructions may cause death or serious injury.

This symbol indicates that ignoring instructions may cause moderate personal 

injury, damage to your unit, or property damage.

This symbol indicates that you should

 

NEVER 

perform the indicated action. 

!

Safety Precautions

Summary of Contents for MB176










Reviews: