set status without any data saved and reverts to its normal display.
2.
Press "inspect" key two time display the time of the door opening/closing, twenty
opening/closing occurrences are stored in the monitor’s memory and may be
reviewed at any time by the operator. Pressed "
▲
" and "
▼
" key to choose.
3.
Press "inspect" key three time display the time of alarm occurrences, twenty alarm
occurrences are stored in the monitor’s memory and may be reviewed at any time
by the operator. Pressed "
▲
" and "
▼
" key to choose.
4
．
Press the “set”
、 “
▲
” 、 “ ▼ ”
at the same time, Will show the high/low
temperature limit. Press the “set” to set the high temperature, and use “
▲
”
、 “▼”
to add or reduce data. Then press “set” again to confirm and save. Meantime show the
low temperature limit, Press “set” will show “Upper sensor calibration” “Lower sensor
calibration”, please refer to the high temperature set. Every time should press “set” to
confirm, if 15seconds not “set”, the data will not be save.
Especially notice
： “
Upper sensor calibration” “Lower sensor calibration” data
shouldn’t change at random
，
If change please adjust first, Or else will make the
temperature different from the actual refrigerator.
4.
Auto print
：
Press the “Print” key, the system switches to auto print mode. Now AUTO displays
in the LCD window and the print indictor lamp changes into normally bright.
Under this mode press the print key of printer to automatically print recorded data.
All data are printed per 20 miniatures with a format as “Year, Month, Day, Time,
temperature”. When the print finishes, the buzzer buzzes for 5 seconds, then the
system exits the print mode. To cancel print midway, press “Print” again.
6.
Manual print
：
Press “Print” twice within 3 seconds, the system switches to manual print mode.
Now the display window shows “----1” and the print indicator lights. Then press
the print key of printer to print the current recorded data. Press “
▲
” once to print
the data of previous day and the display window shows “----2”. Similarly, the
recorded data of others days can be printed manually. All data are printed at an
interval of 20 miniatures in a format as “Year, Moth, Day, Time, temperature”.
When the print completes, the buzzer buzzes for 5 seconds, then the system exits
the print mode. To cancel print midway, press “Print” again.
Special Notice
：
Functions marked with “*” are available only for some users or
when the unit is equipped with the optional parts.
7