─
13
─
3. Fluorescence detection
Click the "Fluorescence Detection" icon to enter the following interface:
Figure 10. Channel selection
In this interface, the fluorescence channel configured by the instrument can be selected
for sample detection. In the figure, the instrument is configured with two channels of 460nm
and 625nm.
Select the desired fluorescence detection channel (click the corresponding icon) to enter
the next level interface.
Note:
The instrument is configured with 2 channels, so the channel needs to be selected
during detection. The instrument configuration channels vary according to the different
subdivision models of the fluorometer. For details, see Chapter 2 Features and Model
Specifications. The selected detection channel should correspond to the excitation and
emission wavelengths of the fluorescent reagents used, otherwise correct results cannot be
obtained.
When you click Blue (460nm) in Figure 6, you will enter the fluorescence detection
interface as shown below: