MRC RHW-925 Operation Manual Download Page 10

5-7.Gateway: The default setting is 192.168.0.1

A. Press         or         KEY then enter the option contents, then press 

or 

 KEY to select the number, press the SETUP KEY The

contents do confirm, then will return to the Gateway directory

B.Press 

 KEY into the Meter CH.option from Gateway

5-8.UNIT: 

A. Press      or         KEY once,into the UNIT Choice,  then use 

 or 

 Key to

select 

 or 

, then press SETUP Key back to UNIT  Choice.

B. Press

 KEY into the Default Settings option from Meter CH.

5-9.Default Settings: Reply factory setting (refer NO.4-7)

4-5.Set value storage:

 Press EXIT / SHIFT KEY save settings, and return to the measurement
 screen, such as SCREEN4-2-5 or SCREEN4-2-6. This time to reconnect 
 after about 25 SEC WiFi is doing set after, then back SCREEN4 -2-3 or 
 SCREEN4-2-4 screen.

4-6. Mesurement and WiFi connection:

A. In SCREEN4-2-1 is Tempereture and Humidity mesurement Function screen.
B. Pt1000 mesurement Function:

1) Pt1000  probe insert to Fig.1 3-18.
2) In SCREEN4-2-1, press        Key once ,into Pt1000 mesurement  scree

(as SCREE 4-2-2),then press          Key again,will back SCREE 4-2-1.

3) SCREE 4-2-3 or SCREE 4-2-4 upper right corner Symbol flashes, that WIFI

connection is ok.

4-7.Reply factory setting

1.Press SETUP KEY once you enter the setup screen as SCREEN4-2-7 &

 SCREEN4-2-8

2.Press 

▲、▼

 KEY select the option to Default Settings item, press       KEY

once you enter N option, press 

 or 

 KEY select  Y  press Enter KEY

,will return to directory option then press EXIT / SHIFT KEY will return to 
factory default action to do its screen will SCREEN4-2-5 or SCREEN4-2-6, 
after about 25 SEC later. would return SCREEN4-2-3 or SCREEN4-2-4.

8

Summary of Contents for RHW-925























Reviews: