MRC DRS4000, User And Technical Manual

Page: 18 / 88

Routine Operation 2-2 DRS4000 Receiver User and Technical Manual
Select Packet Switch Configuration ASI
Bitrate 2-28
Select BDC Type and Band Control 2-29
Complete RCL Calibration 2-30
Firmware Upgrade 2-30
EEPROM Initialization 2-31
Edit/Create Custom Frequency Band 2-31
Upgrade Tuner 2-32
Change Channel Spacing Password 2-32
Preset Menu Operations 2-32
Add a New Licensed Option 2-33
Camera Control Operations 2-34
Remote Operation 2-34
Common Features 2-34
Connect to the Web Browser 2-34
Perform Status Monitor 2-35
Change RF, Demodulator, and Packet Switch
Configuration Settings 2-36
Change Decoder General Settings 2-36
Change Decoder Audio/Video Settings 2-37
Change Encryption Settings 2-37
Review Hardware/Software Configurations 2-38
Rename/Select Site Management 2-38
Change BDC/RF Switch Matrix 2-39
Change/Monitor Camera Settings 2-39
Select New Preset 2-39
2.2 Controls, Indicators, and
Connectors
Controls, indicators, and connectors contained on the front and
rear panels of the DRS4000 are shown in
Figure 2-1 on page 2-
3 .