MRC DRS4000, User And Technical Manual

Page: 44 / 88

Routine Operation 2-28 DRS4000 Receiver User and Technical Manual
2.9.24 Select Packet Switch Configuration Default
Service Name
The steps required to select the packet switch configuration
default service name are provided in
Figure 2-37 .
Figure 2-37: Select Packet Switch Configuration Default
Service Name
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Packet Switch
Configuration and
press OK
Packet Switch
Config.
menu is
displayed
Select Default
Service Name and
press OK
Default Service
Name
menu is
displayed
Enter default service
name, as required,
and press
OK
Press Back until
Control menu is
displayed
2.9.25 Select Packet Switch Configuration ASI
Bitrate
The steps required to select the packet switch configuration ASI
bitrate are provided in
Figure 2-38 .
Figure 2-38: Select Packet Switch Configuration ASI Bitrate
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Packet Switch
Configuration and
press OK
Packet Switch
Config.
menu is
displayed
Select ASI Bitrate
and press OK
Update ASI Bitrate
menu is displayed
Enter bitrate required
and press
OK
Press Back until
Control menu is
displayed