3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
com
.
mrclab
@
mrc
Section 2
Safety
During operation, maintenance and repair of this instrument, the
following basic safety notes should be observed. In case of failure to
follow these instructions, the warnings or notes indicated herein, the
basic protection provided by the instrument, its safety criteria of
design and manufacture, and its predicted use range would be
impaired. If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
MRC is not responsible for any injury as a result of the
user’s
failure to observe the following requirements.
Caution
This instrument is for indoor use.
a)
The ground connection
To avoid the electric shock, the input power line must be
reliably
grounded. The instrument is equipped with the three-
pin plug that has the
third pin (the pin connects the ground),
therefore, the plug should be used
with the grounded power
socket only. This is a kind of safety device. If the
plug cannot
be plugged into the power socket.
b)
Servicing and Replacement of Parts
The operator should not take apart the instrument without
permission.
Only qualified professionals are allowed to replace
elements or adjust
components inside the instrument.
Replacement of components while unit is connected to power
and/or turned on is prohibited.
c)
Observe voltage/power requirements
Before the instrument is connected with the AC power source,
the voltage of the power source should be the same with the
required voltage of the instrument (a deviation of 10% is
allowed). The rated load of the power socket should not be
lower than the requirements of the instrument.
