MRA Multi-X-Creen MXC, Mounting Instructions

Page: 3 / 8

3
GB
MOUNTING INSTRUCTIONS
DL650 2017- Multi-X-Creen
Thank you for buying a MRA Windshield.
Read this manual carefully and check the parts list for completeness before you begin. We recommend
that you have your screen fitted by an authorised workshop.
Number Article Article No.. Required tools
1 MRA screen --- Allen keys, 3 mm, 5 mm, 10 mm
Open-end spanner
1 Brackets, 1 pair 11259
4 Rubber nuts, M5 10629
4 Plastic washers, 12 x 5 mm 10635
4 Oval-head screws, black, M5 x 16 mm 10554
4 Cap nuts, M6 11216
4 Allen screws, M6 x 12 mm 10866
4 Plastic washers, 12 x 6 x 1 mm 10559
How to mount the screen onto your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen.
3. Mount the brackets supplied onto the required position on your motorbike using the M6 x
12 mm Allen screws and the 6 mm washers (P1).
4. Tighten the M6 x 12 mm Allen screws and mount the M6 cap nuts from behind. Hold the M6
x 12 mm Allen keys in place using the 5 mm Allen key, and tighten the cap nuts using the 10
mm open-end spanner.
5. Insert the rubber nuts through the brackets (P2).
6. Mount your MRA screen onto the brackets using the M5 x 16 mm oval head screws and
plastic washers, and tighten the screws.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
spirits to clean the screen as they will damage it.
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de