mr
.
steam
®
Controls
__________________________________________________________________
11
Care Tips
Use only mild soap and water on a soft cloth to clean
the control. Do not use abrasive cleansers
Safety and Operating Information
Set the steambathing duration and tem-
perature according to personal preference, however it is
highly recommended to begin steambathing at a low
temperature setting to gauge comfort and safety levels.
Set the duration at 10 minutes max. to gauge comfort
and safety levels. This will allow the steam generator to
heat up and begin producing steam.
Do not use any iSteam
®
control without
reading and understanding the Mr.Steam
®
steam gener-
ator Installation and Operation Manual (PN 100472).
Failure to read and understand these instructions may
result in an inoperative or hazardous installation.
8:19 AM
HOME
SAVE
CANCEL
PASSCODE LOCK
1
2
3
4
5
6
CLEAR
Enter your Passcode
Passcode Lock
7
8
9 10
0 0 0 0
OFF ON
Settings > Passcode
The Passcode feature can help prevent unintentional use of
the steambath. Please refer to the steam generator
Installation, Operation and Maintenance manual (PN
100472) before using the steam bath. The Passcode feature
cannot insure unintentional use of the steambath.
Enter a 4 digit passcode using the keypad. Press the pass-
code lock button ON under the 4 digit code to turn the
passcode lock on. Press SAVE to store the passcode. The
next time the iSteam
®
control is turned on the user will be
prompted to enter the passcode. Press CANCEL to exit
without storing the passcode lock.
If you forget your passcode, power should be turned off at
the circuit breaker. After 1 minute turn the breaker back on.
The passcode lock will automatically be turned OFF.
CAUTION
!
CAUTION
!
CAUTION
!
WARNING
!
Warranty
To view or download the Mr. Steam
®
Control Warranty
and register your product go to:
blog.mrsteam.com/wr
The peel and stick warning sticker, provided in the
Steambath Generator Installation, Operation and
Maintenance Manual, must be read and permanently
affixed in a conspicuous location near the steam room.
Failure to read and affix this warning sticker in a con-
spicuous location may result in serious injury or death.
If an iSteam control is installed outside the steam
room a Remote Temperature Probe (PN iMSTS) must
be installed inside the steam room per installation
instructions supplied with the Remote Temperature
Probe. Failure to install according to instructions will
result in an inoperative control and overheating of
the steam room.
