background image

mr

.

steam

®

 

Electric Towel Warmers

   

Installation and Operating Instructions

________________________________________________________________

 

INSTALLER:

_

______________________________________________________

READ THIS ENTIRE INSTRUCTION MANUAL THOROUGHLY 
BEFORE BEGINNING INSTALLATION. LEAVE  THESE 
INSTRUCTIONS WITH HOMEOWNER.

   

BE CERTAIN ELECTRICITY IS SHUT OFF 

AT MAIN PANEL BEFORE WIRING OR SERVICING YOUR 
TOWEL WARMER. Follow instructions to make certain your 
Towel Warmer is properly attached to the wall. FAILURE TO 
FOLLOW THESE STEPS COULD RESULT IN HAZARDOUS 
CONDITIONS.

   

To avoid possible fire hazard, the Towel 

Warmer must remain in its intended position. MOUNT  
THIS UNIT ONLY AS SHOWN IN THESE INSTRUCTIONS.  
DO NOT alter or modify any Mr. Steam products. Doing so 
may result in an inoperable or hazardous installation and will 
void the warranty.

1. Install in accordance with  

National and local codes.

2. Do not locate in shower  

stall or near shower spray.

3. Do not locate within the  

shower or tub zone.

4. All models are to be pro- 

tected by dedicated and suitably  
rated GFCI circuit breaker or equal.

TO ENSURE CORRECT OPERATION OF YOUR TOWEL WARMER,  
PLEASE FOLLOW ALL THE INSTRUCTIONS CAREFULLY, 
OBSERVING THE “CAUTION” NOTATIONS FOR EACH STEP.

Inspect Towel Warmer

Unpack the Towel Warmer carefully to avoid any damage or  
loss of any part. When opening the box be sure that the parts 
are not accidentally discarded. Towel Warmers are shipped in 
specially designed shipping cartons. The entire surface of the 
Towel Warmer is hand-wrapped to protect the finish. It is your 
responsibility 

to immediately inspect for any damage.

HOMEOWNER:

__________________________________________

THANK YOU for selecting Mr.Steam Towel Warmer, the 
perfect addition to bathrooms, family spas, and exercise 
rooms within your home. Our products have long been 
a standard for quality and comfort, and we are sure that 
you will experience continued enjoyment from the Towel 
Warmer you have purchased by following these simple 
instructions.

 

TOWEL WARMERS ARE HOT!  The 

Towel Warmer is an electrical heating appliance, intended 
only for indoor residential applications and, as such, 
should be installed and used with  certain precautions for 
your safety.

1. INSTALLATION PROCEDURES FOR PERMANENTLY 

WIRED WALL-MOUNTED UNITS MUST BE 
ACCOMPLISHED BY QUALIFIED PERSONNEL IN 
STRICT ACCORD WITH APPLICABLE NATIONAL AND 
LOCAL BUILDING AND ELECTRICAL CODES.

2. DO NOT place TOWEL WARMER units inside a shower, 

sauna or steam room enclosure or any other wet loca-
tion or with elevated temperatures.

3. CAUTION is advised when Towel Warmer is accessible 

to children.

4. For the ultimate ease in use, a dedicated wall switch 

or timer can be used to control the TOWEL WARMER 
unit. Contact Mr.Steam for an in-wall 24-hour-7 day 
timer (PN W-103588) NOTE: All switches and control 
devices must be installed on the load (black) side of the 
Towel Warmer circuit in compliance with the National 
Electric Code and Local Codes. (see page 8 for installa-
tion instructions)

IMPORTANT:

 The finish of your Towel Warmer can be 

protected and maintained by an occasional wiping with 
a soft, non-abrasive, damp cloth and lightly polished, 
thereafter, with a soft dry cloth when the Towel Warmer 
is cold. Under no circumstances should abrasive cleaning 
powders, metal polish or chlorine-based cleaners be used 
on any part of this product.

IMPORTANT:

 This appliance is intended for towels 

washed in water. Fabrics that contain soap or deter-
gent residue may show what appears to be scorch 
marks. However this is simply the discoloration of the 
residue. The Towel Warmer unit does not reach suffi-
cient temperature to scorch fabric. We are not respon-

sible for discoloring or damage 
of any fabrics.

This picture shows the recom-
mended  method of draping a 
towel on a towel warmer. Ensure 
that as much as possible of the 
towel’s surface is touching the 
towel warmer to ensure fast  
even warming of the towel

2

!

WARNING

!

WARNING

!

WARNING

!

CAUTION

Shower/Tub 

Zone

Do not locate the 

towel warmer within 

the shower/tub zone

For illustrative purposes only

TOWEL WARMER SPECIFICATIONS

_____________________________________________________________

  

Dimensions (inches) 

 

Model No.  W x H x D 

Amps 

Volts/Phase  Weight (lbs.)

_____________________________________________________________

W500 

22.5 x 25 x 5 

0.83 

120/1 

20

_____________________________________________________________

W542 

23.75 x 26 x 5.25  1.25 

120/1 

25

_____________________________________________________________ 

W634 

19.5 x 27.5 x 7.25  1.67 

120/1 

25

_____________________________________________________________

Summary of Contents for Fifth Avenue H542













Reviews: