mr
.
steam
®
aromasteam
Operation and Installation Instructions
______________________________________________________________________________________________
4
Installation of Pressure Hose to AromaSteam System.
1.
Unscrew the pressure end nut from the pump head and remove the shipping hose
and the pressure end nut.
2.
Insert the pressure hose through the hole of the pressure end nut and firmly push
the pressure hose onto the pressure valve.
3.
Screw the pressure end nut onto the pressure valve and tighten the nut by HAND only.
Installation of Suction Hose in Scent Container
1.
Locate the “container cap” in the AromaSteam box.
2.
Unscrew the cap from the Mr.Steam scent container and discard.
3.
Insert the suction hose with the open end from below through the hole in the
container cap (see Fig. 3).
4.
Insert the filter into the scent container so that the filter rests on the bottom.
5.
Screw the cap onto the scent container.
Installation of Suction Hose to AromaSteam System
1.
Unscrew the suction end nut from the pump head and remove shipping hose
(see Fig. 3) (discard shipping hose, keep pressure end nut).
2.
Remove suction end nut from the shipping hose.
3.
Insert the open end of the suction hose through the hole of the suction end nut.
4.
Firmly push the hose onto the cone of the suction valve at the pump head.
5.
Screw the suction end nut to the suction valve.
IMPORTANT NOTE:
HAND-TIGHTEN ONLY.
Figure 4
Open End
Container Cap
Suction Hose
Filter
Co
nt
ai
ne
rH
ei
gh
t
8
in
ch
es
Suction
Suction
Pump
Pressure
Pressure
End Nut
Valve
Head
Valve
End Nut
Figure 3
AromaSteam IOM 08:AromaSteam 05.IOM 6/16/08 10:24 AM Page 4
