Pairing with a Bluetooth Device
The AudioWizard system is ready to pair when it is not
already connected to another device. To pair your device
with the AudioWizard, first make sure you are in range of
the AudioWizard system, and that it is turned on.
1. Open the Bluetooth settings on your device. Refer to
your device manufacturer for specific instruction on
how to reach these settings.
2. In these settings, turn Bluetooth on (if it is not already on)
3. Choose “Gecko in.stream” from the list of available
devices.
4. When prompted, enter 5555 as the password.
Your mobile device should now be paired with the
AudioWizard system and ready to use.
The AudioWizard will keep up to 8 devices in its memory.
If one of these devices is in range and has its Bluetooth
turned on it will automatically pair with the AudioWizard.
All drawings are for illustrative purposes only.
If the number of devices used with AudioWizard
exceeds 8 the first device in its memory will be automati-
cally erased. The device can easily be added by follow-
ing the steps for pairing. It is possible to erase all pairing
information from the memory by holding down the AUX
button for 10 seconds and then releasing.
If more than one device tries to connect to the Au-
dioWizard system, the priority goes to the first device
that is available during searching.
Bluetooth Connection
Once the Bluetooth pairing is complete and connection
has been established between the devices, the Au-
dioWizard will be ready to start playing audio.
If the mobile device moves out of range and loses con-
nection it should reconnect automatically as soon as it
moves back into range.
6
mr
.
steam
®
AudioWizard
™
__________________________________________________________________
Aux
Input
AW Control
AudioWizard Keypad
Adapter Cable
Control Cable
Control
Cable
Red Cap Audio Pigtail
(7-1/4”)
Command
Audio Stream
Speaker
Input
Terminals
Smart Phone
or
Mobile Device
iSteam
Control
or
A
B
Connecting the Control to AudioWizard
®
The AudioWizard must be connected to either the
iSteam Control
®
or the AW Control as shown.
AudioWizard is supplied with a 30 ft. cable that has
6-pin mini-din male connectors on each end.
Do not force or twist
cable ends together. Forcing or twisting
cable ends may damage the connectors.
iSteam
iSteam's audio pigtail is the shorter
of the two pigtails, it is covered with
a red cap. remove the red cap and
plug in the cable.
AW Control
The AudioWizard control requires
the use of an adapter cable supplied
with the AudioWizard. The adapter
cable must be plugged in between
the AudioWizard 30 ft.control cable
and the AudioWizard control as
shown.
All Audio wiring shall be
installed in accordance with National
Electric Code and local electrical codes.
CAUTION
!
CAUTION
!