AudioWizard
®
Control Cable Installation
Do not force or twist cable ends together.
Forcing or twisting cable ends may damage the connectors.
Do not route the AudioWizard control cable inside conduit together with power
wires, close to hot water or steam piping. Do not strain, staple, pinch or otherwise damage the
AudioWizard control cable. Doing so may result in an inoperative installation.
Route the AudioWizard control cable from the AudioWizard to the desired control location.
If using an iSteam control see the iSteam Control IOM (PUR 100477) for complete details
on locating and installing the iSteam control.
Installation of the AudioWizard
®
Control
(The AudioWizard control is not required when
used with an iSteam Control.)
To install the AudioWizard control, select the most
appropriate location for the control and use the
cut-out template on page 2 to prepare the surface.
Clean the surface, peel the backing paper from
the adhesive on the control and insert the control
into the hole (see illustration).
mr
.
steam
®
AudioWizard
™
__________________________________________________________________
5
Pull off
adhesive gasket
1.35”
2.78”
All drawings are for illustrative purposes only.
CAUTION
!
CAUTION
!