19
Locating the Caddy/Fragrance:
1. Place in a location that allows visual monitoring of the fragrances level.
2. Place in a location that allows for easy replacement of the fragrance container.
3. The caddy should not be installed in areas accessible to children. A locked room is strongly
recommended (ie: utility room).
4. The maximm distance from the pump to the bottom of the caddy is 6 feet (Diagram 1).
5. The caddy is designed and intended for indoor use only. Do not install outdoors.
6. Do not install in an unheated location where water could freeze.
7. Locate in an area where the ambient temperature does not exceed 88˚ F.
8. Never locate the caddy near or on the steam boiler. Doing so may result in fire, property
damage or personal injury
Diagram 1
WARNING
!
Using a fragrance container that is not secured
in the caddy, or using a caddy that is not mounted may
result in spillage, excessively strong vapors or a fire hazard.
VOLUME
Recommended
Setting
Fragrance
Setting Knob
Power Button
LED Light
A R O M A F L O
®
L2210-2 Rev C
VOLUME
ON/OFF
Do not install or operate this product without read-
ing and following the supplied Installation and Operation Manual.
Additional copies of the manual can be found at www.mrsteam.com
or by contacting MrSteam at 1-800-767-8326.
For Commercial Installations Only
CAUTION
!
CAUTION
!
Recommended
Setting
OPERATION
Powering Up the Pump
IMPORTANT NOTE:
This step only needs to be performed during installation.
1. The pump needs to be turned on before it can be used
2. Ensure power is being supplied to the pump.
3. Press and hold the power button for 3 seconds.
The LED will turn solid green.
PUMP LED LIGHT:
KEY:
Flashing Green LED
Pump is OFF. Press and hold the power button for 3 seconds to turn the pump on.
Solid Green LED
Pump is on and has been activated from the in-shower control.
The LED will turn off each time the pump injects fragrance into the steam line.
No Light
Pump is OFF
The AromaFlo pump will inject a metered amount of fragrance into the steam line only when the steam solenoid valve is open.
Adjusting the Amount of Fragrance Delivery
The AromaFlo system has been factory set to deliver a suitable amount of aromatic
fragrance into a typical sized steam room. Do not exceed the maximum setting.
Please contact the MrSteam Technical Service Department before changing this setting.
Contact the MrSteam Technical Service Dept. at (800) 76-STEAM (East coast)
or (800) 72-STEAM (West Coast) for assistance or additional information.
Increasing the settings may introduce excessive concentration of
fragrance into the steam room, resulting in a health hazard.
WARNING
!
All diagrams for illustrative purposes only
18
O P E R A T O R S E C T I O N
AromaFlo
Operation and Installation Instructions
®
All Drawings for Illustrative Purposes Only