7
®
Operating Instruction
Operating Instruction
SETTING THE TEMPERATURE
Diagram 3: Press TEMP key to set the desired temperature or display the temperature setting. The control
is preset and will display a temperature setting of 110˚F (default setting). With the temperature displayed,
press the LEFT or RIGHT arrows to set the desired temperature (80°F to 120°F) in one degree increments.
Set the steam bathing temperature according to personal preference, however it is highly recommended
to begin steam bathing at a low temperature setting to gauge comfort and safety levels.
MEMORY FEATURE
If the control is turned off manually before it times out then the default settings of 20 minutes and 110°F
will be used the next time the control is turned on. If the control times out (not manually turned off) then
the previous user time and temperature settings will be used when the steambath is turned on.
USER PRESETS
Diagram 4
Use the key program to store preferred settings.
To program preferred settings:
Press ON/OFF key to turn generator on. Press key once to program PROG1.
Press it twice to program PROG2. The selected setting will be displayed.
Enter the preferred time and temperature settings.
The AirTempo will store the following settings: Set point, Time duration & Aroma state.
To select PROG1 or PROG2:
Press ON/OFF key then press key once to select PROG1, press it twice to select PROG2.
The steambath will operate at the stored settings.
Diagram 3
Diagram 4
TEMP
Time &
Temperature
adjustment
User Preset
1 3
AROMA
CHROMA
AROMASTEAM
The AromaSteam is an optional accessory that automatically
injects aromatic oil into the steam. Press the ON/OFF key to
turn the steam generator on. Then, press the AROMA key.
>LÛiÌ i>À>V°
The AromaSteam turns off
automatically when the steam generator stops heating. Press
the AROMA key to turn it off during a steam session. The in-
dicator will turn off. To conserve battery life, the indicator will
only be lit when the display is ON.
C H R O M A S T E A M
The ChromaSteam is an optional accessory that provides
colored light in the steam room. Press the CHROMA key to
turn light on. Press twice to select the next color. Press again
to turn the light off. Note that the light can be turned ON
even if the steam generator is OFF. To conserve battery, the
>LÛiÌ i>À>V
will only be lit when the display is
ON.
TEMP
CHANGING THE TEMPERATURE UNITS
(˚F/˚C)
When the generator is ON, press and hold the TEMP key for 10
seconds. The temperature units will toggle to Fahrenheit (F) or
Celsius (C).
USING AIRTEMPO AS A REMOTE
The AirTempo can be removed from its holder and used as a remote
control to warm up the steam shower. When AirTempo is returned to its
holder the steam generator will run for the full set duration. After 10 min-
utes the steam generator turns off if the AirTempo is not returned to its
dock. The steam generator will not restart unless AirTempo is in its dock.
U S IN G
5VGCO.KPZK)GPKG
WITH AIRTEMPO
-Ìi>ÝÉii
will allow the steam generator to warm up the steam
room for 10 minutes. To continue the steam bath session press any
button on the AirTempo control. After 10 minutes the steam generator
turns off if the AirTempo is not touched.
ÀÎäÕÌiÃ>vÌiÀÌ iÃÞÃÌi
Ü>Ã]Ì iÃÌi>}iiÀ>ÌÀÜ
not restart unless AirTempo is in its
dock.
AROMASTEAM
The AromaSteam is an optional accessory that auto-
matically injects aromatic oil into the steam. Press the
ON/OFF key to turn the steam generator on. Then,
press the AROMA key. LED above the aroma icon. The
AromaSteam turns off automatically when the steam
generator stops heating. Press the AROMA key to turn
it off during a steam session. The in-dicator will turn
off. To conserve battery life, the indicator will only be
lit when the display is ON.
CHROMASTEAM
The ChromaSteam is an optional accessory that pro-
vides colored light in the steam room. Press the
CHROMA key to turn light on. Press twice to select the
next color. Press again to turn the light off. Note that
the light can be turned ON even if the steam gener-
ator is OFF. To conserve battery, the LED above the
aroma icon will only be lit when the display is ON.
USING AIRTEMPO AS A REMOTE
The AirTempo
®
can be removed from its holder and used as a re-
mote control to warm up the steam shower. When AirTempo
®
is
returned to its holder the steam generator will run for the full set
duration. After 10 minutes the steam generator turns off if the
AirTempo
®
is not returned to its dock. The steam generator will
not restart unless AirTempo is in its dock.
USING SteamLinx/iGenie WITH AIRTEMPO
®
SteamLinx/iGenie will allow the steam generator to warm up the
steam room for 10 minutes. To continue the steam bath session
press any button on the AirTempo
®
control. After 10 minutes the
steam generator turns off if the AirTempo
®
is not touched. For
30 minutes after the system was on, the steam generator will not
restart unless AirTempo
®
is in its dock.
CHANGING THE TEMPERATURE UNITS (
˚
F/
˚
C)
When the generator is ON, press and hold the TEMP key
for 10 seconds. The temperature units will toggle to
Fahrenheit (F) or Celsius (C).
