Page 11
Inspection
Inspection
Caution!
Switch off machine and dis-
connect electrical drive machines from
mains before inspection!
Screw connections
Tighten all nuts and bolts after the
first operating hour.
Tighten nuts and bolts every 100
operating hours.
Replace loosen nuts and bolts.
Check all hydraulic connections for
tightness and secure seat.
Pressure plate guide
The pressure plate guide must be
greased at all times (see Table 3:
Suitable lubrication greases
).
Hydraulic system
Check oil level when riving knife is
retracted.
Fig. 6 - Dip stick
Check oil level. The oil level must be
in between the marking and the end
of the dip stick. If no oil is visible on
the dip stick fill with hydraulic oil
immediately.
marking
Summary of Contents for Horizontalspalter 550
