6
clockwise to increase pilot flame.
to ensure proper operation.
Manual gas
control knob
boss
Gas
inlet
Pilotstat
power unit
Pressure regulator
screw in
outside corner
pressure
regulator
opening
regulator
Pilot gas
outlet
tapping
directly
Pilot flow adjusting screw
system, possible defects that will cause there symptoms and
procedure is as stated on the plate attached to the heater.
Pilot out of adjustment
Replace
burner orifice
then check for damaged manifold.
Replace
Gas cock not in position
Pilot gas flow adjustment screw may be closed Gas control knob must be turned to pilot
and held depressed
Intermittent Use
can cause the gas control to deteriorate more rapidly, the system
should be checked more often.
The gas control should be replaced if:
to pop back up when released.