Using The Iced Tea Pot
To brew lced Tea:
1.
Prior to first use, clean unit according to instructions in section
“Cleaning
Your iced Tea Pot Before First Use’, on page 6.
3.
Place 5-7 regular size tea bags, or 2-4 level tablespoons of loose tea
in a tea ball, and place into the brewer. Do not place sugar in the brewer
along with the tea It will clog the brew lever.
4.
Fill pitcher with water to the water level line marked on the pitcher
and
pour into the brewer - approximately 32 ounces. The water will not leak
from the brewer. See
Figure 1.
5.
Fill the pitcher with ice to the ice marking line on the pitcher - approxi-
s.
6.
mately 3-4 full large cube tray
See Figure 2.
Place the brewer, with lid, into the pitcher. Make sure the brewer and
snugly.
o not operate the machine unless the pitcher and
brewer with lid fit snugIy. Otherwise hot water and steam could
escape. DO NOT OPERATE WlTHOUT LID TO AVOID THE RISK
OF SCALDING AND BURN FROM HOT WATER AND
STEAM.
7. To turn the machine on,plug
cal outlet and push the
the cord into an electri
ON button firmly until a "c l i c k "
IS
heard, The indicator light will come on when the
button is released after a click” is heard. See
Figure
3. NOTE: If the Ii ght does not turn on the first
time, push the ON button again firmly and release
PLEASE NOTE: The first time the machine is used,
it may
turn the machine on;
not be necessary to depress the ON button to
into an outlet may start
simply plugging the machine
the brewing cycle. A/so, if th
ON button is depressed before the machine is plugged into an outlet,
plugging the machine into an out/et will start the brewing cyc/e.
Not e: If you wish to turn the machine OFF during the
grasp the molded plug and unplug the power cord.
brew cycle,
7
Summary of Contents for SERIES TM10
Page 10: ...31 Notes ...
Page 11: ...31 Notes ...