1.
Plug the coffeemaker in. Press power button. It will blink slowly in standby
for brew or blend.
2.
Fill the blender jar to the “WATER” marking with clean, filtered water.
3.
Lift the lid of the unit and pour the water into the reservoir.
4.
Place the reusable coffee filter (or standard 5-cup basket-style paper
filter) into the brew basket.
5.
Using the ICED side of the coffee scoop , pour 2 scoop of grounds into
the reusable coffee filter . Close the lid.
6.
Fill the blender jar with milk to the milk line (about 2 oz of milk).
7.
Fill the blender jar with ice cubes to the “ICE” marking.
8.
Place the blender jar full of ice and mix-ins under the brew spout .
Press the “OVER ICE” button – ensure the LED is illuminated.
9.
Wait 3-4 minutes for brewing to complete. Once dripping slows and stops,
grab blender jar from underneath the spout . Note: a few sparse
coffee drips may come from the drip spout post brew – the drip tray will
catch these and keep your countertop mess free.
10.
Pour desired syrups, flavorings or mix-ins into the blender . Sweet tips:
• Syrup or sugar of some kind greatly impacts the frosty consistency of the
frappe. We recommend following one of our favorite recipes in the
recipe book!
• Use the blender cap as a measuring device to measure 1 tbsp, 2 tbsps., 3
tbsps., or ¼ cup.
8.
7.
CLEAN COFFEEMAKER BEFORE
FIRST USE
DISHWASHER SAFE PARTS OF YOUR
COFFEEMAKER
LET’S MAKE FROZEN COFFEE!
11.
Place the blender lid on the blender jar . Place the blender jar on the
blender mount. Twist handle to the left to lock into place.
12.
Press the “BLEND” button. The blender will automatically blend your
frappe to the perfect consistency.
13.
When blending is complete, remove lid and pour your frappe into the
reusable tumbler or separate drinking vessel.
14.
Insert the straw in lid, place on tumbler and enjoy!
Just follow these simple steps:
1. Wash the blender jar, blender lid, blender measuring cap,
tumbler, tumbler lid, straw, coffee filter, coffee scoop and brew
basket in a mixture of mild detergent and water. Rinse each
thoroughly.
2. Fill tumbler with water to the water line and pour into reservoir.
Replace brew basket in position and nylon filter (or paper 5-cup
basket style paper filter) into brew basket.
3. Position tumbler under brew spout, plug in unit and press HOT
BREW. Note: the unit is on when the LED is lit.
4. When brewing is complete, discard water from tumbler and rinse
tumbler thoroughly with clean water.
5. You Mr. Coffee Frappe™ Coffeemaker is now ready for use!
1. Blender jar
2. Reusable coffee filter
3. Brew basket
CAUTION:
THE ELECTRICAL BASE, POWER CORD AND PLUG ARE
NOT DISHWASHER SAFE AND SHOULD NEVER BE IMMERSED IN
WATER OR OTHER LIQUIDS.
To thoroughly clean your coffeemaker, you can put the following parts
into the top-rack of the dishwasher
13
9
7
1
13
13
5
14
14
13
19
18
7
6
9
10
16
13
13
13
5
3
17
