PAGE 40 — DCA-150USJ — OPERATION AND PARTS MANUAL — REV. #1 (01/15/08)
Shutdown Procedure
To shutdown the generator use the following procedure:
1. Place both the
MAIN
,
GFCI
and
LOAD
circuit breakers
as shown in Figure 39 to the
OFF
position.
3. Let the engine cool by running it for 3-5 minutes with no
load applied.
4. Place the
MPEC Control Switch
(Figure 55) to the
OFF/RESET
position.
Figure 55. MPEC Control Switch (Off/Reset)
5. Verify that the
all
status LED on the MPEC display
are
OFF
(not lit).
6. Remove all loads from the generator.
DCA-150USJ — GENERATOR SHUT-DOWN PROCEDURE
Emergency Shutdown Procedure
1. To shut-down the engine in the event of an emergency,
switch the
MAIN
,
GFCI
and
LOAD
(Figure 39) circuit
breakers to
OFF
position.
2. Place the
MPEC Control Switch
switch (Figure 55) to
the
OFF/RESET
position.
NEVER
stop the engine suddenly except in an emergency.
DO NOT
use the emergency stop switch a as method of
shutting down the generator. This switch is
ONLY
to be
used in the event of an emergency.
WARNING - SHUTTING DOWN THE GENERATOR
Summary of Contents for Ultra-Silent DCA-150USJ
Page 3: ...DCA 150USJ OPERATION AND PARTS MANUAL REV 1 01 15 08 PAGE 3 1 NOTES ...
Page 20: ...PAGE 20 DCA 150USJ OPERATION AND PARTS MANUAL REV 1 01 15 08 NOTE PAGE ...
Page 53: ...DCA 150USJ OPERATION AND PARTS MANUAL REV 1 01 15 08 PAGE 53 1 NOTE PAGE ...
Page 85: ...DCA 150USJ OPERATION AND PARTS MANUAL REV 1 01 15 08 PAGE 85 1 NOTE PAGE ...