manualshive.com logo in svg

MQ Multiquip WHITEMAN B Series, Operation And Parts Manual

The MQ Multiquip WHITEMAN B Series is a versatile and reliable product designed for efficient concrete finishing. To ensure optimum performance and maintenance, it is crucial to have the Operation and Parts Manual at your disposal. Download this essential manual for free from manualshive.com, your trusted source for user manuals.

Share
Download
background image

B-SERIES  WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #9 (07/06/10) — PAGE 15

B-SERIES TROWEL— GENERAL INFORMATION

B-Series Walk-Behind Trowel Familiarization

This walk-behind trowel is designed for the 

floating

 and

finishing

 of concrete slabs.

Take a walk around the trowel. Take notice of all the major
components (see Figure 3, pages 16 and 17) like the engine,
blades, quick pitch control, air cleaner, centrifugal stop switch
etc. Check that there is always oil in the engine.

Read

 all the safety instructions carefully. Safety instructions will

be found throughout this manual and on the trowel. Keep all
safety information in good, readable condition. Operators should
be well trained on the operation and maintenance of the trowel.

Before using your  trowel, test it on a flat watered down section of
finished concrete that is free of any debris and other objects.

This trial test run will increase your confidence in using the trowel
and at the same time it will familiarize you with the trowel’s
controls. In addition you will understand how the trowel  handles
under actual conditions.

Engines

This trowel is available with either an 8.0 HP 

HONDA

, 8.5 HP

ROBIN, 

or a 8.0 HP

 Briggs and Stratton 

gasoline engine. In

addition, a 2.0 horsepower 115/230 VAC, single phase electric
motor is also available. Refer to the engine owner’s manual for
instructions regarding the operation and maintenance of your
engine. The engine manual is included with your  trowel at the
time of shipping from Whiteman. Please contact your nearest
Multiquip Dealer for a replacement should the original manual
disappear.

Drive System

Power is transferred from the engine or electric motor to the
gearbox input shaft via a V-belt or pulley drive system. The pulley
engages using either a centrifugal or manual clutch. See  page
23.

Gearbox

The 

gearbox

 is located beneath the engine and transfers power

to the 

rotor

 or 

spider 

assembly. The gearbox controls the

rotational speed of the trowel and is equipped with two shafts
(input and output).

Spider

The vertical output shaft of the gearbox connects to a cast hub
called the 

spider

. The spider has either 3 or 4 arms that extend

outward that are used for attachment of blades or other
accessories. Remember as the gearbox output shaft rotates so
does the spider assembly.

NEVER 

attempt to 

lift 

the trowel by yourself.

ALWAYS 

get the assistance of another

person to help lift the trowel or use a crane or
lifting device to move the trowel.

Moving the B-Series Walk-Behind Trowel

This  walk-behind  trowel is designed to be moved and handled
in several ways. The easiest way to lift the trowel is to use the

auxiliary lifting tube

 that is attached to the main handle. See

page 24, Figure 19. When using the auxiliary tube, always use

two persons

 to lift the trowel.

Some models have a 

lifting bale

 (option) installed. A strap or

chain can be attached to the lifting bale, allowing a forklift or
crane to lift the trowel up onto a slab of concrete. Use a lifting
device of adequate lifting capacity to lift the trowel.

Training

For proper training, please use the “

TRAINING CHECKLIST

”

located in the front of this manual (Page 6). This checklist will
provide an outline for an experienced operator to provide training
to a new operator

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Blades

The blades of the trowel finish the concrete as they are rotated
around the surface. Blades are classified as 

combination 

(8

inches wide),

 float

 (10 or 8 inches wide), and 

finish

 (6 inches

wide). This trowel comes  equipped with either 

three

 or four

blades

 per rotor equally spaced in a radial pattern and

attached to vertical rotating shaft by means of a 

spider

assembly

.

Centrifugal Stop Switch

In the event of a trowel runaway condition (operator releases
the handle), a 

centrifugal stop switch

, 

manual clutch

 or

micro-switch 

depending which trowel you have, will stop

the engine and bring the trowel to a halt.

Summary of Contents for WHITEMAN B Series





























































































































Reviews:

No comments

Related manuals for WHITEMAN B Series

Bartell Global TS78 Owner'S Manual preview
TS78
Brand: Bartell Global Pages: 28
BOMAX BM424 Operation Manual preview
BM424
Brand: BOMAX Pages: 27

Brands by name

Popular brands

Load more brands