PAGE 16 — MVH128GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (03/08/18)
BASIC ENGINE
Figure 3. Engine Controls and Components
11
1
4
6
5
9
7
8
10
2
3
INITIAL SERVICING
The engine (Figure 3) must be checked for proper
lubrication and filled with fuel prior to operation. Refer to the
manufacturer's engine manual for instructions and details
of operation and servicing.-
1.
Throttle Lever – Used to adjust engine RPM speed.
For normal operation this lever should always be placed
in the
RUN position.
2.
Fuel Cap – Remove this cap to add unleaded gasoline
to the fuel tank. Fill with unleaded gasoline.
3.
Fuel Tank – Refer to Table 2 for fuel tank capacity.
Make sure cap is tightened securely.
DO NOT over
fill. For additional information refer to Honda engine
owner's manual.
DANGER
Add fuel to the tank only when the engine
is stopped and has had an opportunity to
cool down. In the event of a fuel spill,
DO
NOT attempt to start the engine until the
fuel residue has been completely wiped up
and the area surrounding the engine is dry.
4.
Recoil Starter (Pull Rope) – Manual-starting method.
Pull the starter grip until resistance is felt, then pull
briskly and smoothly.
5.
Oil Drain Plug – Remove this plug to remove oil from
the engine's crankcase.
6.
Fuel Valve Lever – OPEN to let fuel flow, CLOSE to
stop the flow of fuel.
7.
Dipstick/Oil Filler Cap – Remove this cap to determine
if the engine oil is low. Add oil through this filler port as
recommended in (Table 5).
8.
Choke Lever – Used in the starting of a cold engine,
or in cold weather conditions. The choke enriches the
fuel mixture.
9.
Muffler – Used to reduce noise and emissions. NEVER
touch when
hot!
10.
Spark Plug – Provides spark to the ignition system.
Set spark plug gap according to engine manufacturer's
instructions. Clean spark plug once a week.
11.
Air Cleaner – Prevents dirt and other debris from
entering the fuel system. Remove wing-nut on top of air
filter cover to gain access to filter element. Reference
the maintenance section in this manual for servicing.
