45
44
6. Print a Single Result
Select the memory value that you
wish to print using by the «<»or «>»
buttons. Press the small switch next
to the printer symbol on the data
compartment. «Pr 1» is displayed
and the printer starts printing.
•
Print all Memory Data
Please follow the above instructions
but press on the small switch next to
the printer symbol for about 3 seconds.
«Pr 1» is displayed and the printer
starts printing all data.
10. ANALYSE DATA BY COMPUTER
MicroDrop
®
pf 900
can be connected via a RS232 connection
port with a computer and all memory data can be analysed by
the MicroDrop
®
pf analyser
software program.
9. PRINT DATA WITH THE MICRODROP PR
DIAGNOSTIC PRINTER
The MicroDrop
®
pf 900
can be
connected with the MicrDrop
®
pr
diagnostic printer (available as an
accessory) to print data from the
memory .
1. Open the Data Compartment
from the underneath.
2. Connect one end of the printer
cable into the jack next to the
printer symbol and the other end
with the printer next to «Input». It
does not matter which end of the
cable you insert into which device.
3. Insert paper into the printer by
following the instructions supplied
with the printer.
4. Switch the printer on by moving the
start button to the «I» position.
5. Press the ON/OFF button to turn
the Peak Flow Meter on.
MicroDrop®pf 900_GBA 23.07.2003 16:38 Uhr Seite 44
