© 2020 SMARTY KID. Wszystkie prawa zastrzeżone
EN
15
earbuds are correctly paired with the target device, the connection between the
devices will be automatic and the LEDs that has been flashing will go out.
In case of failure, repeat the pairing procedure by turning the headset and target
device off and on again.
It is possible to pair only one earbud with the target device. To do this, turn on
the selected earbud and proceed as if you were pairing a set.
When successfully paired with the target device, the earbuds will remember the
paired device and will automatically connect to it as soon as it is turned on and
in Bluetooth range. There is no need to pair again the devices to which earbuds are
already connected.
When the earpiece is switched on, it will try to connect to the last target device
to which it was connected. If you want to connect them or pair them with
another device, disconnect them from the device to which they are currently
connected.
5.3 Phone call handling
Earbuds offer some phone control when you connect them to your phone.
Answering calls
Briefly touch the touch button on any of the earbuds
Call rejection
Touch and hold touch button of whichever earbud for
2 seconds.
Finishing phone calls
Briefly touch the touch button on any of the earbuds
You cannot start a call with the earbuds. Make the call using the phone.
5.4 Music playback
Volume up
Three times briefly touch the touch button of the
right earbud.
Volume down
Three times briefly touch the touch button of the left
earbud.
Pause
Briefly touch the touch button on any of the earbuds
Play
Briefly touch the touch button on any of the earbuds
Next track
Two times briefly touch the touch button of the right
earbud.
Previous track
Two times briefly touch the touch button of the left
earbud.
6. Troubleshooting
In case of any problems with the device, please refer to the following tips.
The device cannot be
switched on.
Charge the battery in the device.
The battery does not
charge when the
charging case is
connected
Check that the power supply is functioning correctly.
Check the USB-microUSB cable. If it is damaged, use
another. If the checked cable does not charge, please
contact the manufacturer's hotline.
